Run the factory before you build it.

Machines, benches, racks, AMRs and people, placed in one design and run together in physics. Watch the shift, count what comes off the line, and find what goes wrong while it is still a file.

A simulated electronics and robotics factory seen from above its pack-out: people box finished robots at their benches beside the pallet racks, while the robot line and the machines work behind them.
Drawn in the workbench's 3D view: Factory C, a simulated electronics and robotics factory, from above its pack-out. A simulation, not a real plant.

Half an hour, measured.

One simulated run of 30 minutes, 10:00 to 10:30 plant time, after a two-hour warm-up, on the factory as it ships. It counts what each line finished and how long work waited. One run is n = 1: a first reading of this layout, not an average.

robots and 22 actuators an hour
4
robots, 11 actuators, 6 housings and 1 hand board finished
2
the plant's OEE
0.50
units of work in progress, on average
19.9
median lead time; 5,555 s at the 95th percentile
1,170 s

Simulated

The simulated factory's robot line: people at their benches assemble small robots, with the racks and the machines behind them.
来源文件 cloud://global/factories/electronics-assembly/工具 the 30-minute run in Node (sim-engine.js, Rapier at 500 Hz) on the layout of 5d556bb9408; docs/verification.md, 2026-11-21运行于 gb10-direct时间

What the run found.

The same half hour also showed what to fix. The milk run delivered no kit cart: its AMR stalled with the cart at 139.6 s, and the AMRs after it could not lift it. One AMR touched a roller conveyor on the robot line. Nobody fell. A fault found here costs a change to a file.

falls of people or robots
0
collision: an AMR against a roller conveyor, at 1,218 s
1
kit carts delivered by the milk run
0

Simulated

The simulated factory's pack-out: two packers lift boxed robots at their benches, in front of the pallet racks.
来源文件 cloud://global/factories/electronics-assembly/工具 the same run; docs/verification.md, 2026-11-21运行于 gb10-direct时间

188 units, in a browser tab.

The whole factory opens in the workbench in a browser. People are rigged humans moved by their joints' torques, never pinned in place. The physics steps 500 times a second. The G1 in it is a model of Unitree's robot, in simulation, not a product of ours.

units: machines, benches, racks, AMRs, people and a G1
188
physics steps a second
500
to open with every unit drawn; 47 s fully cold
43 s

Simulated

A simulated electronics and robotics factory seen from above its pack-out: people box finished robots at their benches beside the pallet racks, while the robot line and the machines work behind them.
来源文件 cloud://global/factories/electronics-assembly/工具 capture-factory.mjs --present --peaks, one cold open each; docs/verification.md, 2026-11-21运行于 This computer (dell-gb10-1)时间

Run your floor.

Place the machines, seat the people, and play the shift.