Run the factory before you build it.

Machines, benches, racks, AMRs and people, placed in one design and run together in physics. Watch the shift, count what comes off the line, and find what goes wrong while it is still a file.

A simulated electronics and robotics factory seen from above its pack-out: people box finished robots at their benches beside the pallet racks, while the robot line and the machines work behind them.
Drawn in the workbench's 3D view: Factory C, a simulated electronics and robotics factory, from above its pack-out. A simulation, not a real plant.

Half an hour, measured.

One simulated run of 30 minutes, 10:00 to 10:30 plant time, after a two-hour warm-up, on the factory as it ships. It counts what each line finished and how long work waited. One run is n = 1: a first reading of this layout, not an average.

robots and 22 actuators an hour
4
robots, 11 actuators, 6 housings and 1 hand board finished
2
the plant's OEE
0.50
units of work in progress, on average
19.9
median lead time; 5,555 s at the 95th percentile
1,170 s

Simulated

The simulated factory's robot line: people at their benches assemble small robots, with the racks and the machines behind them.
ProcedenciaArchivo cloud://global/factories/electronics-assembly/Herramienta the 30-minute run in Node (sim-engine.js, Rapier at 500 Hz) on the layout of 5d556bb9408; docs/verification.md, 2026-11-21Se ejecutó en gb10-directCuándo

What the run found.

The same half hour also showed what to fix. The milk run delivered no kit cart: its AMR stalled with the cart at 139.6 s, and the AMRs after it could not lift it. One AMR touched a roller conveyor on the robot line. Nobody fell. A fault found here costs a change to a file.

falls of people or robots
0
collision: an AMR against a roller conveyor, at 1,218 s
1
kit carts delivered by the milk run
0

Simulated

The simulated factory's pack-out: two packers lift boxed robots at their benches, in front of the pallet racks.
ProcedenciaArchivo cloud://global/factories/electronics-assembly/Herramienta the same run; docs/verification.md, 2026-11-21Se ejecutó en gb10-directCuándo

188 units, in a browser tab.

The whole factory opens in the workbench in a browser. People are rigged humans moved by their joints' torques, never pinned in place. The physics steps 500 times a second. The G1 in it is a model of Unitree's robot, in simulation, not a product of ours.

units: machines, benches, racks, AMRs, people and a G1
188
physics steps a second
500
to open with every unit drawn; 47 s fully cold
43 s

Simulated

A simulated electronics and robotics factory seen from above its pack-out: people box finished robots at their benches beside the pallet racks, while the robot line and the machines work behind them.
ProcedenciaArchivo cloud://global/factories/electronics-assembly/Herramienta capture-factory.mjs --present --peaks, one cold open each; docs/verification.md, 2026-11-21Se ejecutó en This computer (dell-gb10-1)Cuándo

Run your floor.

Place the machines, seat the people, and play the shift.