From idea to something real.

Design it, build it, and bring it to life. From your first sketch to the finished product.

UpperBody-001's arm in the 3D app with its hand board in the palm, pulled apart in the exploded view: the green board with its parts sits between the palm and its cover.UpperBody-001's arm in the 3D app with its hand board in the palm, pulled apart in the exploded view: the green board with its parts sits between the palm and its cover.
Recorded in the workbench. A robot hand, with its circuit board inside it.

See it happen.

Simulated: two PETG gripper jaws, each held at its left end and pushed sideways at its face, drawn bent by their true deflection and coloured by stress. The 4 mm jaw on the left bends far and is red at its root; the 6.625 mm jaw on the right bends little and stays blue.
Wanted
A gripper jaw that holds its grip without bending more than 2 mm.
What we did
Tested the first design, found it bent 8.7 mm, and made it thicker until every check passed.
The result
A 6.625 mm jaw that bends 1.95 mm. Twenty-four solves in 84 seconds.

A simulation. The study and its run are in the example files.

Read the whole caseOpen the study

An SO-101 arm in simulation lifts a white cube from a blue pad toward an orange pad; a translucent blue copy of the arm shows where its policy plans to be half a second later.An SO-101 arm in simulation lifts a white cube from a blue pad toward an orange pad; a translucent blue copy of the arm shows where its policy plans to be half a second later.
Wanted
A robot arm that picks up cubes it has never seen.
What we did
Let the arm practise in simulation, scored every try, and trained it on its own best runs.
The result
From 0 to 40 of 50 new cubes in six rounds.

A simulation: 742 recorded runs.

Read the whole casePull the cube

Simulated: an SO-101 arm with a longer upper arm and forearm reaches down into a blue tray 40 mm deep, its gripper against the tray's front wall. Each part is drawn as the convex collision pieces the physics engine uses, in white, at the joint angles the engine held 5.200 s into the run.
Wanted
The best version of a robot arm for one job.
What we did
Tried eighteen versions of the arm in simulation and kept the one that did best.
The result
One winning design, with the run that chose it on the record.

A simulation.

Read the whole caseOpen the run

See every demonstration

What you can make.

The products that make things.

Workbench CommandAGI: sel lengan robot diputar dengan tangan di tampilan 3D-nya, lalu kode desain itu sendiri (arm-cell.3d.tsx) ditampilkan dengan View as Code dan tampilan 3D dibuka di sampingnya.Workbench CommandAGI: sel lengan robot diputar dengan tangan di tampilan 3D-nya, lalu kode desain itu sendiri (arm-cell.3d.tsx) ditampilkan dengan View as Code dan tampilan 3D dibuka di sampingnya.

CommandAGI

The workbench and the platform under everything here.

VibeStartup’s home page: an idea typed into its one box, “A subscription box of 3D-printed desk toys”, over the line “Turn an idea into a running business.”VibeStartup’s home page: an idea typed into its one box, “A subscription box of 3D-printed desk toys”, over the line “Turn an idea into a running business.”

VibeStartup

From one sentence to a business that is open.

HeyFabLab’s home page: “Type it. Make it.”, an idea picked into the prompt (“a duck robot that kicks a ball”) while the Microduck kicks a ball on its card.

HeyFabLab

Type one line. Get a robot toy you can make and sell.

Limboid’s home page: “Hydraulic robots for industrial inspection and heavy work.” over a quadruped on a pipe rack, then the page scrolled to operator rounds and heavy handling.Limboid’s home page: “Hydraulic robots for industrial inspection and heavy work.” over a quadruped on a pipe rack, then the page scrolled to operator rounds and heavy handling.

Limboid

Hydraulic robots for heavy work, in design.

VibeCAD’s home page: “See what’s inside. Shape what’s next.” over a motor bracket drawn as a part, its features named and numbered, as the tabs move from Understand to Modify to Verify.

VibeCAD

CAD in your browser, with an AI engineer beside you.

There's more.

Your work, handled.

From everyday tasks to complicated projects. Get things done across the tools you already use.

Whole worlds to explore.

Build places, try ideas, and discover what happens. From virtual computers to simulations of the physical world.

Make your first thing.

It runs in your browser. Nothing to install.