See it happen.

Real work, start to finish. What someone wanted, what we did, and what came of it. A simulation says it is one.

A thread in the CommandAGI workbench: two agent members, Claude Code and Codex, each on its own sign-in, work through three mounted tasks.A thread in the CommandAGI workbench: two agent members, Claude Code and Codex, each on its own sign-in, work through three mounted tasks.

Software

Wanted
A long list of software tasks, finished without watching every step.
What we did
Claude Code and Codex joined one thread, each on its own sign-in, and took the tasks one by one.
The result
3,818 tasks claimed and 2,718 finished, with every step written down.

CommandAGI's own backlog, since 2026-10-23. The recording shows two agents in a thread.

Read the whole caseStart a thread

Simulated: two PETG gripper jaws, each held at its left end and pushed sideways at its face, drawn bent by their true deflection and coloured by stress. The 4 mm jaw on the left bends far and is red at its root; the 6.625 mm jaw on the right bends little and stays blue.

A physical part

Wanted
A gripper jaw that holds its grip without bending more than 2 mm.
What we did
Tested the first design, found it bent 8.7 mm, and made it thicker until every check passed.
The result
A 6.625 mm jaw that bends 1.95 mm. Twenty-four solves in 84 seconds.

A simulation. The study and its run are in the example files.

Read the whole caseOpen the study

An example company in the CommandAGI workbench: its overview, then its cap table, books, deadlines and deals, each a section read from the company's own files.An example company in the CommandAGI workbench: its overview, then its cap table, books, deadlines and deals, each a section read from the company's own files.

A business

Wanted
Nine companies, run from one place.
What we did
Gave each company a folder: its plan, its people, its agents and a budget for each piece of work.
The result
Forty budgets, $290 a month in all, and every task a file anyone on the team can read.

CommandAGI's own companies. The recording shows an example company.

Read the whole caseStart with a website

A geoeconomics simulation on a globe in the CommandAGI workbench: oil flows from the Persian Gulf to China, India, Japan, South Korea, Europe and the United States drawn as arcs, each country coloured by its oil inflow, while the globe turns slowly from the Gulf toward the Pacific.A geoeconomics simulation on a globe in the CommandAGI workbench: oil flows from the Persian Gulf to China, India, Japan, South Korea, Europe and the United States drawn as arcs, each country coloured by its oil inflow, while the globe turns slowly from the Gulf toward the Pacific.

A simulated world

Wanted
To know what happens to the price of oil if the Strait of Hormuz closes.
What we did
Built the strait as a world and ran it at three levels of escalation.
The result
The price peaked at $90.5, $117.3 and $144.1. Each run names the lever that was pulled.

A simulation.

Read the whole caseTurn the globe

An SO-101 arm in simulation lifts a white cube from a blue pad toward an orange pad; a translucent blue copy of the arm shows where its policy plans to be half a second later.An SO-101 arm in simulation lifts a white cube from a blue pad toward an orange pad; a translucent blue copy of the arm shows where its policy plans to be half a second later.

A robot

Wanted
A robot arm that picks up cubes it has never seen.
What we did
Let the arm practise in simulation, scored every try, and trained it on its own best runs.
The result
From 0 to 40 of 50 new cubes in six rounds.

A simulation: 742 recorded runs.

Read the whole casePull the cube

Three SO-101 arms on one bench in the simulation: the left arm sets a red cube on the shared pad, and the middle arm takes it on toward the right arm.Three SO-101 arms on one bench in the simulation: the left arm sets a red cube on the shared pad, and the middle arm takes it on toward the right arm.

A robot cell

Wanted
Three arms that pass a cube down the line.
What we did
Placed three real arm models in one world and let them run with real physics.
The result
A working cell you can pull on, in your browser, before any machine moves.

A simulation.

Read the whole caseOpen the cell

The CommandAGI-Printer-001 world replaying its print run (an illustrative record): the print head moves over the bed.The CommandAGI-Printer-001 world replaying its print run (an illustrative record): the print head moves over the bed.

A print shop

Wanted
To know a print job will fit before it reaches a printer.
What we did
Checked the sliced part against each of the shop's twelve printers and played it through on the twin.
The result
Admitted on 12 of 12 printers: 154 layers, 3 hours 50 minutes.

A simulation. No printer was reached.

Read the whole caseOpen the printer

Simulated: an SO-101 arm with a longer upper arm and forearm reaches down into a blue tray 40 mm deep, its gripper against the tray's front wall. Each part is drawn as the convex collision pieces the physics engine uses, in white, at the joint angles the engine held 5.200 s into the run.

A design search

Wanted
The best version of a robot arm for one job.
What we did
Tried eighteen versions of the arm in simulation and kept the one that did best.
The result
One winning design, with the run that chose it on the record.

A simulation.

Read the whole caseOpen the run

Now make yours happen.

Start with a sentence. Watch the work. Step in whenever you like.